Lenovo FLEX 3-1480 Hardware Maintenance Manual page 38

FLEX 3-1480/FLEX 3-1580 Hardware Maintenance Manual
34
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following labels:
The following labels need to be peeled off from the old base cover and put on
the new base cover.
a Barcode label
b Rating label
c GML label
BT label (for US/CA/TW)
d
e WL label (for US/CA/TW)
f KCC label (for Korea)
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
FLEX 3-1480
d
FLEX 3-1580
d
g
h
i
j
k
l
a
b b c
g
e h i
f
a
b b
c
g
e h i
f
Postel label (for Indonesia)
D side label (for Indonesia)
BIS label (for India)
WL/BT label (for Israel)
WL/BT label (for Brazil)
WL label (for South Africa)
j
l
k
j
l
k