How To Perform Scan Operations - Toshiba e-STUDIO202L Scanning Manual

How to Perform Scan Operations

Users can scan originals not only by selecting one of the scan modes, but also by combining two
scan modes at a single operation.
The following procedures describe about the basic instructions on how to perform the scan oper-
ations.
P.19 "Scanning Procedure for Single Agent"
P.22 "Scanning Procedure for Dual Agents"
Users can use a template to perform a scan operation as well. For more information about a
template, see the following section.
P.73 "Using Template"
Users can perform Copy & File, which enables users to copy the originals as well as storing
the originals as a file. For more information about Copy & File, see the following section.
P.89 "Copy & File"
Scanning Procedure for Single Agent
1
Place the original(s).
For instruction about placing the originals, see Operator's Manual for Basic Func-
tions.
2
Press the [SCAN] button on the control panel to enter the scan
menu.
The basic scan menu is displayed.

How to Perform Scan Operations

19