Specifications; Dvd Player - Sharp HT-CN410DVH Service Manual

HT-CN410DVH
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual units.
l General
Power source
Power consumption
Dimensions
Weight
Audio input terminals
Audio output terminals
Video output terminals
Video output terminals
l Amplifier
Output power
l DVD player
Signal system
Supported disc types
Video signal
Audio signal
l Tuner
Frequency range

SPECIFICATIONS

AC 230 V, 50 Hz
Power on: 45 W
Power stand-by:0.6W
Width: 428 mm
Height: 55 mm
Depth: 360 mm
3.8 kg
Analogue input (IN 1): RCA type × 1 pair (L/R)
Analogue input (IN 2): RCA type × 1 pair (L/R)
Analogue output (OUT): RCA type × 1 pair (L/R)
Headphone: 16-50 ohms (recomended: 32 ohms)
Digital output: Caoxial type x 1
S-video output: S-terminal × 1
Video output: RCA type × 1
Component video output: P
SCART output: SCART terminal x 1
Front speakers: RMS: 42 W (21 W + 21 W) (DIN 45 324)
Centre speaker: RMS: 21 W (DIN 45 324)
Surround speakers: RMS: 42 W (21 W + 21 W) (DIN 45 324)
Subwoofer speaker: RMS: 45 W (DIN 45 324)
PAL/NTSC colour
DVD (with the same region number on the back of the unit or ALL), SVCD, VCD, audio CD,
CD-R, CD-RW, MP3
Horizontal resolution: 525 lines S/N ratio: 56 dB
Frequency characteristics
S/N ratio
Dynamic range
Total harmonic distortion ratio
FM: 87.5 - 108 MHz
AM: 522 - 1620 kHz
4
, P , Y
B B
Linear PCM DVD: 20 Hz to 20 kHz
(sampling rate: 48 kHz)
20 Hz to 20 kHz
(sampling rate: 96 kHz)
CD: 20 Hz to 20 kHz
CD: 65 dB (1 kHz)
Linear PCM DVD: 95 dB CD: 94 dB
0.2 % maximum