Communications
7.2 Disassembling C355
Needed material: suitable screw driver with cross recess
Unscrew the 6 screws on the lower case shell and lift it.
7.3 Assembling C350 and C355
Needed material: suitable screw driver with cross recess
Put charger contact springs in upper case shell.
Insert keypad.
Put board in upper case shell.
Insert loudspeaker (only C355).
C355:
Attach the other case shell and close the device by screwing the 6 screws in the
lower case shell.
C350:
Attach the other case shell and close the device by closing the latches and screwing
the 3 screws in the lower case shell.
Make sure that the charging contact springs are fixed correctly.
Confidential
31
COM MD CC GRM T
J. Junggebauer
Version 1.0
July 2005