Table of Contents
Advertisement
Horizontal Vent Pipe Installation Instructions
(Through the wall)
This boiler is design certified for use with the following venting systems
Company
Product
The above vent pipe and fittings are used
!
for venting gas burning category III and
IV appliances. Do not use this vent pipe or
fittings for venting appliances burning fuels
such as wood, oil, kerosene or coal.
!
Do not use this vent pipe and fittings for
venting incinerators of any kind.
1.
For correct installation of vent system,
read all of these instructions and refer to
the vent pipe manufacturer's instructions.
2.
Failure to use this venting system will void
the manufacturer's warranty and may
result in rapid deterioration of the venting
system, a potential health hazard.
3.
Faulty vent installation can allow toxic
fumes to be released into living areas.
!
This may cause serious bodily injury or
property damage. Vent performance may
also be affected by improper assembly.
4.
Install separate vents for forced exhaust
appliances and natural draft appliances.
A common vent between natural draft
and forced exhaust appliances may cause
toxic gases to exhaust through the natural
draft appliance rather than to outside air.
Breathing exhaust gases will cause serious
personal injury or death.
HORIZONTAL VENT PIPE INSTALLATION INSTRUCTIONS
HEAT-FAB
®
SAF-T-VENT™
STAR-34™
CAUTION
CAUTION
WARNING
FLEX-L
Z-FLEX
®
Z-VENT™
All installations of boilers and venting
should be done only by a qualified expert
and in accordance with the appropriate
manufacturers manual. Installing or venting
!
a boiler or any other gas appliance with
improper methods or materials may result
in serious injury or death due to fire or to
asphyxiation from poisonous gases such
as carbon monoxide which is odorless and
invisible.
13
ProTech
®
®
FasNSeal™
WARNING
Advertisement
Table of Contents
