Removal Of The Steering Gear; Disassembly Of The Steering Gear - Tomberlin E-MERGE 2007 Maintenance Manual

7. Disassemble:
○
· Outer clasp
5
○
· Inner clasp 3
· Steering shaft ④
○
· Bearing 2
NOTICE:
Press the steering shaft out of the bearing on one side with the
hydraulic press, and extract the bearing with universal bearing
extractor. Extract the bearing on the other side in the same
method. The bearings, once removed, must be replaced with
new ones.
Re moval of the Steering Gear
1. Remove:
· Split pin
· Slotted nut
· Lower fixing bolt on the universal joint
Tightening torque
23 Nm (18.4 ft·1b)
· Universal joint assembly
· Fixing bolt on the steering gear
Tightening torque
40 Nm (29.5 ft·1b)
· Steering gear
Disa ssembly of the Steering Gear
1. Disassemble:
· Drag link ball joint of the steering gear
· Secu re the drawbar of the steering gear with one spanner,
and loosen the locknut with another spanner.
· Tape
68