3. Remove the bottom cover. See "Replacing the bottom cover" on page 114.
4. Open the latches on both sides of the slot at the same time
Save the removed memory module for future use.
5. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Insert the memory module
downward until it snaps into place
and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might get damaged.
6. Install the bottom cover.
7. Turn the computer over. Connect the ac power adapter and all cables.
Replacing the wireless WAN card
Before you start, print these instructions. Read the important safety information first. See "Important
safety information" on page vi.
Note: The following information is only for user-installable modules.
118
ThinkPad T460s User Guide
1
into the slot at an angle of about 20 degrees. Pivot the memory module
2
. Ensure that the memory module is firmly installed in the slot
1
, and then remove the memory module
2
.