Installing The Ses Driver; Installing On Windows Vista Computers - Western Digital My Book User Manual

Installing the SES Driver

1 A
If you do not install the WD software, you should install the SCSI Enclosure Services
(SES) driver on Windows computers to keep the hardware pop-up wizard from
displaying every time you connect your drive to your computer.
Note: The SES Driver is installed automatically when you install the WD
This appendix includes the following topics:

Installing on Windows Vista Computers

Installing on Windows 7 and Windows 8 Computers
Installing on Windows Vista Computers
After connecting the drive as shown in Figure 3 on page 6, the Found New Hardware
screen displays.
Note: If Autoplay is enabled, two additional screens might appear at the same
1.
On the Found New Hardware screen, select the Locate and install driver software
option:
software.
time as the Found New Hardware screen. If they appear, close them.
MY BOOK
USER MANUAL
INSTALLING THE SES DRIVER – 42