U-Line CLR1215 Quick Start Manual page 15

QUICK START GUIDE
depth. A fuller cube with less of a dimple results in a
thicker ice bridge. As the ice bridge becomes thicker, the
tendency for the cubes to stay together as a slab
increases. A bridge thicker than 1/8" (3.2 mm) may cause
cubes to overfill the ice bucket.
ICE BRIDGE
Ice Bridge and Dimples
Cube Types
1/4" TO 1/2"
(6.4 mm to 12.7 mm)
DIMPLE
THIN BRIDGE
DEEP DIMPLE
DIMPLES
1/16" TO 1/8"
(1.6 mm to 3.2 mm)
ICE BRIDGE
THICK BRIDGE
LITTLE OR
NO DIMPLE
Ice thickness adjustments are made using the control
panel as follows:
1. To enter the thickness adjustment mode:
• Press and hold
• The display will switch to "0" to confirm the
thickness adjustment mode has been selected.
The factory setting is "0," and the total range of
adjustment is -5 to +5 (ideal range is -1 to +1). Use
raise the setting and thicken the ice bridge, or
the setting to thin the ice bridge.
Ice cubes in any given batch will vary, so it is necessary
to choose cubes from the sample area for comparison
when making adjustments.
12
u-line.com
for 5 seconds.
to lower
to