Adding A Dish; Filling The Rinse Aid Dispenser - Crosley ZDM6502AS Use & Care Manual

Adding A Dish

To add or remove items after wash cycle starts:
1 Open door slightly and wait a few seconds until wash
action stops before completely opening.
2 Add the item.
3 Close door firmly to latch and cycle will automatically
resume.

Filling the rinse aid dispenser

Rinse aid greatly improves drying and reduces water
spots and filming.Without rinse aid your dishes and
dishwasher interior will have excessive moisture. The
Heated Dry option will not perform as well without rinse
aid.The rinse aid dispenser,located next to the
Detergent cup,automatically releases a measured
amount of rinse aid during the last rinse.
Preparing and loading dishes
12
CAUTION
TO AVOID BURN INJURY: Slightly open door and
wait until spray arms and wash action stop. Hot
water may splash out of dishwasher. Failure to do
so may result in injury.
If spotting and poor drying is a problem,increase the
amount of rinse aid dispensed by
higher number.The dial is located under the dispenser
cap.
If the rinse aid is low, the Rinse Aid light is illuminated at
the beginning and end of the cycle indicating that it
is time to refill.
rotating the dial to a