Preparation; Installing The Projector And Screen - JVC DLA-VS2000 Instructions Manual

DLA-RS1X_EN.book Page 18 Thursday, February 21, 2008 6:13 PM

Preparation

2

Installing the Projector and Screen

Install this unit and the screen. Place this unit and the screen perpendicular to each other.
Failing to do so may give rise to trapezoidal distortion of the projected image.
A
Install the projector and screen
Left/Right position
*0 % up/down position (center)
Up/Down position
*0 % left/right position (center)
Shifting range of projected image
80%
34%
80%
18
Approximately 34 % (maximum) of the projected image
(Turn the dial to the left for maximum)
34%
MDMI 2 MDMI 1 RS-232C
COMPONENT
S-VIDEO VIDEO Y B C B /P R C R /P
SYNC G B R
Approximately 34 % (maximum) of the projected image
(Turn the dial to the right for maximum)
Approximately 80 % (maximum) of the projected image
(Turn the dial to the left for maximum)
Approximately 80 % (maximum) of the projected image
(Turn the dial to the right for maximum)