Saeco HD8603 Bravista Latte + User Manual page 22

ENGLISH
22
14 Open the lid of the milk dispensing spout.
15 Remove the lower part of the milk dispensing spout from the
upper part.
16 Clean all the components in lukewarm water with a mild washing-up
liquid. Rinse all components with tap water and dry them completely.
The internal parts of the frothing system are dishwasher-safe.
, After cleaning the components, you can reassemble them by following the
same procedure, but in reverse order.
Assembly procedure of the milk carafe
1 Push the bottom part of the milk dispensing spout into the upper
part until you hear a click.
2 Close the lid of the milk dispensing spout.
3 Push the fitting onto the rubber tube.