Frothed Milk - Saeco HD8603 Bravista Latte + User Manual

ENGLISH
16
1 Insert an espresso capsule.
2 Fill the milk carafe with milk to a level between the MIN and MAX
indications. Put the lid on the milk carafe and place the carafe in the
machine.
3 Press and hold the white café latte button for 3 seconds until it
starts to flash at brief intervals. Then release the button.
,The machine dispenses milk froth.
4 Press the white café latte button again when the cup contains the
desired amount of milk. The machine has saved the desired amount
of milk and starts to brew the espresso.
5 Press the white café latte again when the cup contains the desired
amount of espresso coffee. The machine has saved the desired
amount of espresso.
Note: The café latte button has been reprogrammed. The machine will dispense
the reprogrammed amount of milk and coffee every time you press the café
latte button.
The minimum quantity of espresso that can be set is approx. 30ml.
The maximum quantity of espresso that can be set is approx. 300ml.
The minimum quantity of milk that can be set is approx. 50ml.
The maximum quantity of milk that can be set is approx. 300ml.
The preset quantities for café latte are approx. 90ml milk and approx. 40ml
espresso.
To reset beverages to their factory settings, see section 'Restoring quantities
to factory settings'.

Frothed milk

Note: To prepare frothed milk, it is not necessary to insert a coffee capsule.
1 Fill the milk carafe with milk to a level between the MIN and MAX
indications. Put the lid on the milk carafe and place the carafe in the
machine.
2 Adjust the position of the drip tray and/or the coffee dispensing
spout.
3 Place a glass under the milk dispensing spout.
Note: Do not insert a coffee capsule into the capsule compartment.
4 Press the frothed milk button.
, The frothed milk button flashes white to indicate the machine is
warming up.
5 After the machine has warmed up, the machine dispenses the frothed
milk directly into the glass. The machine stops dispensing the frothed
milk once it has dispensed the preset volume. You can interrupt the
dispensing process by pressing the white frothed milk button again.
When the machine stops dispensing the frothed milk, the orange rinse
milk circuit button lights up to indicate the milk circuit must be rinsed.
See section 'Rinsing the milk circuit'.