Installing The Battery; Charging The Battery - Motorola MOTORAZR V3M User Manual

Installing the Battery

Your phone is designed to use only Motorola Original
batteries and accessories.
1. Press in the battery
door, release latch
and remove the
battery door.
2. Follow arrows to
insert battery.
3. Replace the
battery door.
4. Close the battery door.
PAGE 6 INSTALLING THE BATTERY
GETTING STARTED
GETTING STARTED

Charging the Battery

New batteries are shipped partially charged. Before you
can use your phone, install and charge the battery as
described below. Some batteries perform best after
several full charge/discharge cycles.
To charge the battery:
1. Insert the charger into
the USB connector on
your phone as shown.
2. Plug the other end of
the charger into the
appropriate electrical
outlet.
3. When your phone
indicates Charge
Complete, remove
the charger.
Tip: You can safely leave the charger connected to your
phone after charging is complete. This will
the battery.
Note: When you charge the battery, the battery level
indicator in the upper right corner of the display shows
how much of the charging process is complete. At least
1 segment of the battery level indicator must be visible
to ensure full phone functionality while charging.
not
damage