To Use The Menus; Switching Input Source; Power On And Off - AOC LE32A3520/61 Service Manual

2.2 To USE the Menus

Power On And off

Press the power button at your TV set or remote controller to power it on.
Reminder
1. Your TV set continues consuming powers at a very low consumption rate. When you will not use it for extended
period of time, disconnect the power cable between the TV set and power socket.
2. When the remote control is not available and if you want to turn on your TV set from the standby mode, please
press the Power key, CH+/- key or the source key at its side.
3. When turning your TV set off with the power switch of your TV set, it enters the power saving mode and displays
red light.

Switching Input Source

You can select signal sources to your AOC TV set directly with your remote controller. You can also press the
Source key to display source menu and then select signal source.
1) Directly select the input signal sources by using
2) Select signal source with the Source key
Press the Source button to display source menu.
Press the button to select desired input source.
Input source contains:TV,AV1,AV2,YPbPr,VGA ,HDMI1,HDMI2,HDMI3,USB.
Press the OK.
6