Hitachi BD-W90XWV Operating & Installation Instructions Manual page 13

How to
use the
Auto Self Clean
function
How to Use the Washing Machine
1. Press the Power button to turn on the power.
2. Select a program.
3. Press the Auto Self Clean button, and then press the
Start/Pause button.
■
The setting is switched off at the time of shipment from the factory.
Once it is switched on, the Auto Self Clean function operates every
time you do your laundry.
■
Prior to the fi nal spin cycle, the outside of the tub, and the inside of the
outer tub are washed to eliminate dirt and mold.
■
To deactivate the Auto Self Clean function, press the
Auto Self Clean button again while the power is on.
●
The Auto Self Clean function runs just before the spin cycle
begins in each program.
●
The Auto Self Clean function cannot be set or cancelled while the
washing machine is operating.
●
The Auto Self Clean function is automatically cancelled when:
- Rinse Hold is set.
- No spinning is set.
●
Depending on the type and degree of dirt, some dirt may not be
removed by using the Auto Self Clean function.
●
If the washing machine is seldom used, some dirt may not be
removed by using the Auto Self Clean function.
●
To clean the tub more completely, we recommend using the
Tub Clean program along with the Auto Self Clean function.
■
The Auto Self Clean function is deactivated if one of the following
programs is selected.
- Duvet
- Rapid 15
- Wool
- Daily 60
- Tub Clean
- Spin
- Drain
13