ZyXEL Communications ARMOR X1 User Manual page 21

Figure 7 Repeater: Configuration > Network > Wireless LAN (2.4G/5G) > WPS
Figure 8 AP: Configuration > Network > Wireless LAN (2.4G/5G) > WPS
The following table describes the labels in this screen.
Table 5 Repeater: Configuration > Network > Wireless LAN (2.4G / 5G) > WPS
LABEL DESCRIPTION
WPS Setup
WPS Select this to enable or disable the WPS feature.
Confirm Click Confirm to save your changes.
WPS Setup
Configured This displays Yes when the WAP6806 has connected to a wireless network using WPS or
when Enable is selected.
WPS SSID This displays the network name for the WPS connection.
WPS Auth Mode This displays the security protocol selected for the WPS connection.
Chapter 3 Repeater Mode
WAP6806 User's Guide
21