AT&T TL7600 User Manual page 41

At&t dect 6.0 expansion headset user's manual
Hide thumbs Also See for TL7600:
Table of Contents

Advertisement

Maintenance and Troubleshooting
Troubleshooting
The ON/OFF
light on the
headset is off
while charging.
• Make sure the power and line cords are
plugged in correctly and securely.
Make sure that the battery connector is
securely plugged into the cordless headset.
Push the headset downwards in the
charging cradle until the ON/OFF light on
the headset turns on.
• Unplug the unit's electrical power. Wait for
15 seconds, then plug it back in. Allow up
to one minute for the cordless headset and
headset base or charger to reset.
Clean the cordless headset and headset
base or charger charging contacts each
month using a pencil eraser or cloth.
• Your headset or headset base might be
malfunctioning. Please refer to the Limited
warranty section on page 49 for further
instructions.
36

Advertisement

Table of Contents
loading

Table of Contents