Motorola MOTO Q 9c User Manual page 81

5 Toggle Status to Bluetooth ON and press the left soft
-
key ( ) (Done).
The Bluetooth indicator
screen.
Note: To extend battery life, set Bluetooth Power to OFF
when not in use. Your phone will not pair with devices
until you set Bluetooth Power back to ON and pair your
phone with the devices again.
pair with a headset or handsfree
device
Before you try to pair your phone with a device,
make sure your phone's Bluetooth power is on and
the device is on and ready in pairing or bonding mode
(see the device user's guide). You can pair your phone
with multiple devices, but only use it with one headset
device at a time.
Your phone lists the devices it finds within range.
1 Press the left soft key (
O
appears in the home
-
) (Start).
2 Use the thumb wheel to scroll to Bluetooth and
press the thumb wheel or center select key (
to select it.
3 Scroll to Bluetooth Manager and press the center
s
select key ( ).
4 Select the device type (handsfree headset, stereo
headset, keyboard, etc.) and press the center
s
select key ( ).
5 Put the device in pairing mode.
6 Press the left soft key (
prompts you to verify your device is ready.
7 Press the left soft key (
8 Select the device from the list.
9 If prompted, enter the device passkey (such as
0000) and press the left soft key (
When the devices are paired, an icon appears on the
home screen.
s
-
) (Add). The phone
-
) (Search).
-
) (Accept).
connections
)
79