Pioneer PDP-5030HD Product Training Manual page 29

Y DRIVE, SCAN (A), (B) Assy
1
Remove the three screws.
Front Case Assy 43 (P)
2
Loosen the rivet.
3
Remove the Lead Cover (P).
4
Pull out Flexible Cable.
2
Lead Cover (P)
Rivet
Turn to release the rivet.
To remove, pull out
the Lead Cover (P) with the rivet
before completely removing the rivet.
5
Remove bottom by the fulcrum at the top of Front Case
Assy 43 (P).
6
Remove the Front Case Assy 43 (P).
6
The hook on the
Front Case Assy 43 (P) was put between
with Rear Case and aluminum materials.
5
PDP-433PU
1
×3
4 4
3
Lead Cover (P)
Front Case Assy 43 (P)
Rear Case
Aluminum
Materials
7
Remove the Rear Case (P). (Screws × 19)
8
Remove the Y DRIVE Assy.
(Connector, PCB Spacer × 3, Screws × 8)
9 Remove the Front Chassis V. (Screws × 5)
10
Remove the Scan IC Spring (43L) and (43R).
(Screws × 1)
8
×2
9
8
8
9
9
Scan IC Spring (43L)
11 Flip over the SCAN (A) and SCAN (B) Assemblies.
If defective replace the scan IC's.
12
SCAN (A) Assy
Y DRIVE Assy
8
×2
8
10
8
8
9
Scan IC Spring (43R)
9
SCAN (B) Assy
11
11
Scan IC's
29.
×6