Verification After Repair; Machine Transportation - Canon mp628 Service Manual

MP620 / MP628 --- 3. REPAIR

3-4. Verification After Repair

(1) Standard inspection flow
In each step below, confirm that printing is performed properly and the machine operates properly without any strange noise.
EEPROM information print
<Check point>
- The information must be printed properly.
<Additional verification to be made> See
-
-
-
-
- At wireless LAN board replacement
Nozzle check pattern print
<Check point>
- The pattern must be printed properly.
Copy function
<Check point>
- Copying must be performed properly.
<Additional verification to be made> See
Communication with a connected computer
<Check point>
- Via USB connection to the computer, printing from the computer must be performed properly
<Additional verification to be made>
- For repair of a specific problem, confirm the applicable specific function in the user mode.
Power-off in the service mode
<Check point>
- The paper lifting plate must be in the raised position.
External and internal appearance
<Check point>
- No grease, oil, or smearing on the timing slit strip film.
- No lifting of the platen ink absorber.
- No foreign material or dislocation of any part inside the printer.
- No damage or scratches that will affect the functionality.
Packaging
<Check point> See
- The carriage must be locked in the home position.
At logic board replacement
At ink absorber replacement
At platen unit or spur unit replacement
At operation panel or LCD replacement
- At document pressure sheet or scanner unit replacement
(paper feeding from the rear tray and from the cassette respectively).
PictBridge, IrDA communication, wired or wireless LAN connection, Bluetooth communication,
Scan-to-Memory function, Card Direct printing, etc.
PictBridge, IrDA LAN, WLAN
4. MACHINE
3-1. Notes on Service Part
3-1. Notes on Service Part
Bluetooth
TRANSPORTATION.
41 / 44
TABLE OF CONTENTS
Replacement.
.
Scan-to-Memory Card Direct