Attaching And Aligning The Custom Door Front - Miele KF 1803 Vi Operating And Installation Instructions

Attaching and aligning the
custom door front
^ Open the door and hang the custom
door with the mounting frame over
the threaded bolts n.
^ Put the side strips back into place
and screw them completely down on
both sides of the appliance door.
Bag E contains spare screws for this
purpose.
^ Screw the nuts o a few turns onto
the threaded bolts n. Do not tighten
the nuts completely.
^ Close the appliance door and check
the distance to doors of adjacent
furniture/fixtures.
Installing the appliance
^ Align the custom door height with the
threaded bolts n.
^ Now tighten the nuts o on top. This
secures the appliance door.
To mount the custom door on the
lower appliance door, simply repeat
the steps under "Preparing the
custom door".
The position of the lower furniture door
depends on the position of the upper
door.
75