Power Conservation - CycleOps Cervo 2.4 Owner's Manual

4) Hold [MODE] and [SELECT] = simultaneously press and hold both [MODE]
and [SELECT] for 2 sec. NOTE: Continuing to hold longer than 2 sec. will clear
all data.
5) Extended Hold [MODE] and [SELECT] = simultaneously press and hold of
both [MODE] and [SELECT] for greater than 5 sec.
SCROLLING MENU:
Find: If [MODE] and [SELECT] are released
clr: If [MODE] and [SELECT] are released when
SEt: If [MODE] and [SELECT] are released
DISPLAY MODES
The computer has two (2) main modes of operation:
1) Trip
2) Interval
Hold [MODE] to toggle between display modes.

POWER CONSERVATION

The computer has power saving features to prolong battery life. The computer powers
down the display after four (4) minutes of inactivity. Press either [MODE] or [SELECT]
to activate the display.
When "Find" is displayed the computer will find
Search for the PowerTap hub.
clr is displayed ALL DATA WILL BE ERASED.
When SEt is displayed on the top level of the
Screen, a flashing "E" , d and t on the middle
Level and 12345 on the bottom level.
E= exit, return to ride mode
d= restore default settings
T= test mode
1 2 3 4 5 = setup menus
11