BMW 2012 R 1200 GS Rider's Manual page 38

Table of Contents

Advertisement

pressure adjustment in the chap-
3
ter "Technology in detail".
Tire inflation pressure
36
outside permissible
tolerance
with Tire Pressure Control
OE
(TPC/RDC)
The general warning light
flashes red.
The tire symbol is dis-
played.
The critical tire inflation pressure
flashes.
z
Possible cause:
The measured tire inflation pres-
sure is outside the permissible
tolerance.
Check tire for damage and
drivability.
If it is still possible to drive with
tire:
Incorrect tire inflation pres-
sure result in poorer han-
dling of the motorcycle.
Always adapt your driving style
to the incorrect tire inflation
pressure.
Correct tire inflation pressure at
next opportunity.
Before adjusting the tire in-
flation pressure, observe
the information on temperature
compensation and on inflation
pressure adjustment in the chap-
ter "Technology in detail".
Have the tire checked for dam-
age by a specialized workshop,
preferably an authorized BMW
Motorrad retailer.
If you are unsure about the driv-
ability of the tire:
Do not continue driving.
Inform roadside service.
Transmission error
with Tire Pressure Control
OE
(TPC/RDC)
--
-- --
"
" or "
" is indicated.
Possible cause:
The motorcycle's speed has not
exceeded the threshold of ap-
prox.19 mph (30 km/h). The
TPC/RDC sensors do not send
their signal until after this speed
has been exceeded for the first
time (
84).
Watch TPC/RDC display at
higher speed. A permanent
fault has not occurred until the
general warning light also lights
up. In this case:
Have fault eliminated by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents