Setting Up Your Phone - AEG voxtel c110 Quick Start Manual

6
Mark two points on the wall that are 80 mm apart to lay the fixing centres as shown below.
BE CAREFUL to check that there are no pipes or electrical wires hidden in the wall.
Fix two screws (7mm head screws required, not supplied) at the marked locations, leaving approximately
7mm between the wall and the screw head.
Hang the telephone on the screws using the wall mount slots. You may need adjust the screws so that
the telephone is securely fixed and does not wobble.
Place the handset on the cradle with the parking hook on the cradle arranged to fit in the parking
recess under the earpiece on the handset.
7

SETTING UP YOUR PHONE

Press the menu or store
cycle through the following options:
SET 1 DATE
SET 2 LCD
SET 3 FLASH
Note:
The system will time out if you leave more than 8 seconds between key presses.
7.1 Set time/date
You will need to set the time and date so they can be shown correctly on the display.
If you subscribe to a caller display service, the time and date will be set automatically on receipt of your
first incoming call, but you may still need to set the correct year.
In standby mode, press the store button
>The display shows "SET 1 DATE".
Press the store button
>The "year" icon will be blinking.
Press the up or down button
Press the store button
>The "month" icon will be blinking.
Press the up or down button
Press the store button
>The "date" icon will be blinking.
Press the up or down button
Press the store button
>The "hour" icon will be blinking.
Press the up or down button
lay the centres as
parking recess
button to enter the menu and then use up and down buttons
.
to confirm.
to set the year.
to confirm.
to set the month.
to confirm.
to set the date.
to confirm.
to set the hour (24 hour format only).
parking hook
rotate
to