Table of Contents
Advertisement
10
Troubleshooting
Problem
No beverage is brewed
when beverage buttons are pressed.
The beverage is not hot enough.
The lever cannot be lowered.
Indicator light
is lit steadily in RED.
Coffee is dispensing very slowly and is
of poor quality.
Beyond the recommended cleaning and maintenance procedures, the CBTL™ Machine is not user serviceable. For additional options,
please refer to the CBTL™ Limited Warranty (p.18).
11
Technical data
162 mm
13CBV_BB_ManualS07_PH.r1a.indd 17
The water tank is empty (the 'No Water' indicator light is on and red).
The used capsule drawer is full. Capsule stuck inside the machine.
³
Turn off the machine, then turn it back on. If the problem persists, take the machine
Brewed Coffee/Tea button was used with an espresso capsule.
³
Lift lever to eject capsule into used capsule drawer, insert new espresso capsule,
and use Espresso or Long Espresso/Tea Latte button.
See the data plate on the bottom of the machine
Max . 15 bar
< 70 dB A
approx. 4 kg
1 litre
10 °C - 40 °C
283 mm
370 mm
Cause / Solution
³
Fill the tank with filtered/bottled water.
Press the desired beverage button.
The machine will resume brewing.
Cold cups / mugs. Scale build-up in machine.
³
Preheat the cup.
If doesn't solve, descale the machine.
³
Empty the used capsule drawer.
Remove the used capsule.
Heating problems.
to an Authorized Service
Center.
17
7/30/13 5:33 PM
Hide quick links:
Advertisement
Table of Contents
