Resetting To Factory Standards; The Energy Saving Function - CBTL DESTO S07 Instructions Manual

4

Resetting to factory standards

1
Turn machine off. Raise the lever to open the capsule compartment.
3
Continue to hold the espresso button and quickly close and open the
lever. The machine will beep 5 times.
5
Close the lever.
5

The energy saving function

The Desto features an energy saving function (normally activated) which automatically reduces energy consumption by approximately 98%
one hour after last use (buttons blink white slowly). To restore normal operating conditions press any button or raise the lever. Appliance
will start warming up. When all buttons turn on and remain steadily lit, appliance is read for use.
12
13CBV_BB_ManualS07_PH.r1a.indd 12
2
Press and hold the espresso button while simultaneously switching
the machine on.
4
Release the espresso button. After a few seconds, the beverage
buttons and 'Multifunction' indicator light will blink.
6
Place a cup on the drip tray. Press the espresso button once. Wait
approximately 2 minutes. The cycle is complete when the 3 buttons are
steadily lit. Repeat this step only if alarm light continues to blink.
7/30/13 5:32 PM