Installing Rear Wheel - BMW G 650 Xmoto Rider's Manual

Loosen lock nuts 5 on left and
8
right by turning counterclock-
wise.
76
Loosen adjusting screws 6 on
left and right by turning clock-
wise so that adjusting plate 7
can be removed.
Remove quick-release axle 8.
z
Roll rear wheel as far forward
as possible and remove
chain 9 from chain sprocket.
Roll rear wheel toward rear out
of swinging arm.
The chain sprocket and
the spacer sleeves on the
left and right are loosely inserted
in the wheel. When removing,
make sure that these parts are
not damaged or lost.

Installing rear wheel

Roll rear wheel into swinging
arm while guiding brake disk
between brake pads.
Roll rear wheel as far forward
as possible and lay chain 9 on
chain sprocket.
Mount quick-release axle 8
with adjusting plate 7 in swing-
ing arm, brake caliper and rear
wheel.
Turn quick-release axle so that
it fits into recess of adjusting
plate.