Advertisement
5. LEFT/RIGHT SOFT KEY
a. Make menu selection.
6. UP
/DOWN
SCROLLING KEYS
a. Scroll through record and menu selections.
b. Adjust receiver voice volume when in Talk mode.
c. Press
to adjust ringer volume when in Standby mode.
d. Press
to enter phonebook when in Standby mode.
7. END; On/O key
a. Ends a call.
b. Leaves current menu operation, up one level.
c. Press for 3 seconds to o the power.
8. CALLER-ID
a. Review caller ID list
b. Including received and missed caller ID.
Base functions
1. RESET button
a. Restores base station to factory settings.
b. Reset button is indented to prevent accidental system reset.
c. All handsets (including administrator) and additional base(s) need to be re-registered after a base station reset.
2. REGISTRATION button (REG)
Enters registration mode along with handset, assigns handset ID (11-19).
3. DIALING-keys
a. Enter the phone number after pressing the speakerphone key.
b. Enter the handset ID or Group ID when making the intercom call or broadcast.
c. Enter the phone number when storing the base speed dial directory.
4. FUNCTION-keys
a. TRANSFER
: During talk, press the key to transfer the call to a registered handset.
b. MEMORY
: Store phone number into speed dial memory of base unit. Up to 20 entries. Or retrieve a phone number from the speed
dial memory during the talking.
c. HOLD
: Press the key to put the call on hold.
d. FLASH
: Press the key to send a ash signal to phone line to retrieve a dial tone after the call ends, or to perform the call waiting
feature provided by local phone companies during a call.
e. REDIAL/P
: Press the key retrieve the last dialed number. Or store a pause time (1 second) while storing the speed dial memory.
5. VOLUME
and
a. Increase or decrease the ringer volume during standby mode.
b. Increase or decrease the voice volume during talk mode.
6. SPEAKERPHONE key
a. Press the key to get a dial tone, followed by a phone number to make an outgoing call.
b. Press the key again to hang up to call.
c. When enable the speakerphone, the backlight of the key will be turned on too.
7. INTERCOM/BROADCAST
a. Enter handset ID then press the key to enable the 2-way intercom feature.
b. Enter handset ID then press and hold the key for over one second to enable the broadcast feature.
Re: Press the
key without entering handset ID rst, all registered handsets will be enabled.
EP801 - Long Range Cordless System
Advertisement
