5.5
Chain Brake with
QuickStop Super
5.5.1
Removing
Troubleshooting chart –
see
– Remove the chain sprocket
cover.
– Remove the clutch drum/chain
sprocket –
see
5.1.
2
1
Take out the screw (1).
Remove the side plate (2).
Take out the screws (arrows).
Remove the cover (1).
– Relieve tension of brake spring
by pushing hand guard forward.
MS 270, MS 280
4.1.
1
Carefully ease the brake
spring (1) off the anchor pin and
take it off the brake lever (2).
2
1
Take out the screw (1).
Pry the brake band (2) out of the
crankcase and disconnect it from
the brake lever (3).
1
1
2
Take out the screw (1).
Remove the bushing (2).
2
Carefully pry the spring (1) off the
pivot pin.
3
2
Pull the hand guard (2) and brake
lever (1) off their pivot pins.
Unhook coasting brake cable (1)
from the brake lever (2).
– Pull the brake lever out of the
hand guard.
1
1
2
1
25