Replacing Annular; Buffers; Crankcase - Stihl MS 270 User Manual

Push the retainer through the
handlebar to the outside and
remove.
Take out the screws (arrows).
1
Pry plug (1) out of the handlebar
to expose the annular buffer.
– Pry the annular buffer out of the
handlebar.
Reassemble in the reverse
sequence.
MS 270, MS 280
9.2

Replacing Annular

Buffers

Annular rubber buffers and a spring
are installed between the tank
housing and crankcase to minimize
vibrations. Damaged annular
buffers must always be replaced.
9.2.1

Crankcase

Removing
– Remove the handlebar –
2
Fit an M6 screw (1) in the
bushing in the annular buffer (2).
Use the screw to pull out the
bushing (1).
– Take the screw out of the
bushing.
see 9.1.
1
1
61