Getting Started
Airflow Considerations
To ensure proper airflow, be sure that your switch is placed in a well-ventilated area and provide minimum
recommended clearance at the front, back and sides of the switch.
Never obstruct chassis air vents.
Note. Clearance is not required at the top and bottom of the chassis.
Mounting the Switch
For information on mounting OmniSwitch 6250 switches, refer to
Hardware Components."
OmniSwitch 6250 Hardware Users Guide
Chassis Top View
Chapter 3, "OmniSwitch 6250 Chassis and
September 2015
Mounting the Switch
}
Rear. 6 inches minimum
at rear of chassis.
Sides. 2 inches minimum
at left and right sides.
}
Front. 6 inches minimum
at front of chassis.
page 2-3