AT&T TL9228 User Manual page 35

Telephone operation
CELL 0:00:30
Handset operation
Making a CELLULAR call
To make a CELLULAR call:
Elapsed
time
• Enter the telephone number (pre-dial mode),
then press
or
entering the phone number.
To end a CELLULAR call:
• Press
telephone base or charger.
The screen displays the elapsed time as you talk
(in hours, minutes and seconds).
NOTES:
1. Some cellular phones may have default setting that has
disabled the feature of making call through the Bluetooth
connection, make sure this setting is enabled before
making a CELLULAR call.
2. You may hear interference if your cellular phone is too
close to the telephone base during a CELLULAR call. Make
sure that your Bluetooth enabled cellular phone is between
one to 12 feet away from the telephone base in order to
maintain a reliable connection between your Bluetooth cell
phone, telephone base, and cell tower.
Answering a CELLULAR call
To answer a CELLULAR call:
• Press
To end a CELLULAR call:
• Press
telephone base or charger.
Call waiting on the CELLULAR line
If you subscribe to call waiting service provided by
your cellular service provider, you will hear one or
more beeps if you have an incoming CELLULAR
call while already on a call.
Press
hold and take the new call. You can press
CELLULAR at any time to switch back and forth
between calls.
CELLULAR. Press DELETE
CLEAR to make corrections when
OFF/
OFF
or return the handset to the
/CLEAR
CELLULAR or
OFF or return the handset to the
/CLEAR
CELLULAR to put your current call on
29
SPEAKER.
/MUTE