Table of Contents
Advertisement
Ensure Hitch Security Pin is in
8
place - through the ATV hitch pin
Ensure the Deck Restraining
9
Chains are secure – BOTH ENDS
Ensure that Hitch Assembly on the
10
Mower is secure and moves freely
Remove any Debris build up on
11
Engine Cooling Air Intake.
Shut Fuel OFF after usage session
11
is over – NOTE – fuel valve located
beneath the fuel tank.
Check Deck Drive Belt Tension –
12
Engine to the Mower Deck
Do general Engine Check -
13
including the air filter check
See the Engine Manufacturers
14
recommendations for servicing.
15
Replace Mower Blades
Check Deck & Drive Belts for
16
Physical Wear
5.2 Blade Replacement
CAUTION
IMPORTANT
The blades should be kept sharp at all times. Sharpen the cutting edges if they appear like blade
labeled – 2. Any blade that resembles – 3 – should be replaced immediately.
Check the blades on the HyperCut Mower by lifting the deck, blocking it on one side and
then examining the blades; if they need to be sharpened or changed remove the HyperCut
Mower from the ATV.
IMPORTANT
To avoid personal injury ALWAYS handle the
blade with care to avoid injury!
The blade retaining bolts have Right Hand Threads –
turn the bolts counterclockwise to loosen!
Replace mower blades that have been
damaged or deeply nicked.
x
x
x
x
x
x
x
x
x
x
x
Hide quick links:
Advertisement
Table of Contents
