Setting Backlight Timer - Motorola i30sx User Manual

Setting Backlight Timer

The backlight illuminates the display when you receive or make calls. You can
set the amount of time that the backlight stays on to 5, 10, 20, or 30 seconds, or
set it to stay on continuously or stay off at all times.
From the Initial Setup screen, press R to scroll to Backlight.
1
2
Press under CHANGE.
C
Press S to scroll to the desired backlight option.
3
4
Press under SELECT.
C
NOTE: Setting the backlight to stay on continuously will decrease the
amount of time you can use the phone before recharging the
battery.
Setting Photo Sensor
To conserve battery power, the photosensor will disable the backlight when you
are in good lighting conditions. To force the backlight to come on every time a
key is pressed, you can turn the photosensor off.
NOTE: Setting the Backlight to come on continuously while the
Photosensor is turned on will drain your battery power.
From the Initial Setup screen, press R to scroll to Sensor.
1
2
Press C under CHANGE.
3 Press S to scroll to the desired option.
4
Press C under SELECT.
Adjusting Status Light
The status light is located on the top of the phone. It illuminates when the phone
is on. See "Status of Your i 30sx Phone" on page 31. You can turn the status
light feature on or off from the Initial Setup screen.
Settings
109