Setting Auto Redial; Setting Backlight Timer - Motorola iDEN i90c User Manual

Setting Auto Redial

When Auto Redial is set to On, if you receive a System Busy or Try Later
message while making a call, the phone will redial the number automatically.
You will hear a ring-back tone when a successful call is placed.
When Auto Redial is set to Off, you must press and hold s to redial the last
number dialed.

Setting Backlight Timer

The backlight illuminates the display when you receive or make calls or use the
phone in poor lighting conditions. You can set the amount of time that the
backlight stays on to 5, 10, 20, or 30 seconds, or set it to stay on continuously or
stay off at all times.
NOTE: The photosensor judges the lighting conditions and will activate
the backlight only when your phone is in poor lighting
conditions.
1
From the Initial Setup screen, press
Press C under CHANGE.
2
S
3 Press to scroll to the desired backlight option.
Press C under SELECT.
4
NOTE: Setting the backlight to stay on continuously will decrease the
amount of time you can use the phone before recharging the
battery.
Setting Photosensor
To conserve battery power, the photosensor will disable the backlight when you
are in good lighting conditions. To force the backlight to come on every time a
key is pressed, you can turn the photosensor off.
NOTE: Turning the Photosensor to OFF will force the backlight to come
on every time a key is pressed and will drain your battery power.
From the Initial Setup screen, press R to scroll to Sensor.
1
Press C under CHANGE.
2
R
to scroll to Backlight.
Settings
163