Additional Function; Adjusting The Water Softener - Smeg ST8246U Instruction Manual

2.3 Additional functions
Adjusting the water softener (on some models only)
2.3.1
N.B.: a different washing program from soak must be used to make
the following adjustment.
Press and hold down the program delay button (ref. 12 fi g. 2-05) until the
preset value appears followed by a dot (normally 3.). Release the button and
then press it again and again until the required value is displayed, as indicated
in the table (see tab. 2-03).
The 6 possible adjustment levels will appear in this sequence:
3., 4., 5., 0., 1., 2..
When the required value appears on the display, release the button; after 5
seconds the appliance automatically reverts to the program delay and the
adjustment is set to the chosen value.
USER INSTRUCTIONS
EN
13