Switching On - Smeg ST8246U Instruction Manual

Only run the soak program with half loads.
To run programmes 6, 7, 8, 9, 10, select the required standard programme and
then press the quick time option button (ref. 6 fig. 2-02).
After using the above tables to choose the most suitable washing cycle, program
the appliance.
Before starting a washing program, make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the dis-
• The spray arms are able to rotate freely and without obstruc-
• The racks have been correctly loaded (see the instructions in
• The dishwasher door is securely closed.
2.2.1

Switching on

Press the on/off button (ref. 1 fig. 2-02) to start the dishwasher. Then wait for one
of the program indicator lights to turn on (ref. 2 fig. 2-02).
USER INSTRUCTIONS USER INSTRUCTIONS
penser (to add detergent, see the instructions in the general
manual).
tion.
the general manual).
EN EN
9 9