Table of Contents
Advertisement
9
Electrical system
9.8.2
Power cable
Connection possibilities
9.9.1
86
Power cable for external 240 V connection
Completely unwind the cable on cable drums to prevent overheating.
Three-core (3 x 2.5 mm
Maximum 25 m in length
1 plug with earth contact
1 socket with earth contact (plug-in devices according to EN 60309)
In order to be prepared for all connection possibilities, Dethleffs recommends
the following combinations:
Fig. 57
Connection possibilities 240 V
connection
Adapter cable:
CEE 17 socket with earth contact (Fig. 57,1) – plug with earth contact
(Fig. 57,2)
Cable reel:
Socket with earth contact (Fig. 57,3) – plug with earth contact (Fig. 57,4)
Adapter cable:
CEE 17 socket with earth contact (Fig. 57,5) – plug with earth contact
(Fig. 57,6)
When using a CEE 17 angled connector with rear socket (Fig. 58,1) only
use a rubberised and sealed IP 44 socket with earth contact (Fig. 58,2).
Do not use sockets without earth contact (Fig. 58,3). Danger of electro-
cution!
9.9
Fuses
Only replace defective fuses when the cause of the defect is known and
has been remedied.
Replace defective fuses only after the power supply has been turned off.
Never bridge or repair fuses.
12 V fuses
The appliances connected to the 12 V power supply in the living area are
fused individually. The fuses are accessible at different positions in the
vehicle.
2
) flexible rubber sheathed cable
Fig. 58
Connecting an angled con-
nector with socket
EN
Globetrotter XXL - 11-06 - DET-0047-01
Advertisement
Table of Contents
