Toyota 2008 Prius Quick Reference Manual page 74

Switching the door unlock function
n
It is possible to set which doors the entry function unlocks.
STEP 1
Turn the "POWER" switch OFF.
STEP 2
When the indicator on the key surface is turned off, push and hold
the key.
The setting changes each time an operation is performed, as shown below.
(Wait for at least 5 seconds after each operation to continue an operation.)
Mode
Driver's door
unlocking mode
All doors
unlocking mode
Single door
unlocking mode
STEP 3
Unlock the doors using the wireless remote control and open one of
the doors.
If a door is not opened within 30 seconds after
doors will be locked again and the alarm will automatically be set.
In case that the alarm is triggered, immediately stop the alarm.
(P. 84)
PRIUS_U_(L/O_0802)
1-3. Opening, closing and locking the doors and back door
for approximately 5 seconds while pushing the
Unlocking doors
Hold the driver's door
handle to unlock only the
driver's
Hold the passenger's door
handle or back door
opener to unlock all the
doors
Hold the front door handle
or back door opener to
unlock all the doors
Hold the driver's door or
back door opener to unlock
the door.
Hold the passenger's door
handle to unlock all the
doors
button on
Beep
Exterior: one beep
Interior: two beeps
sound three times
Exterior: one beep
Interior: two beeps
sound twice
Exterior: one beeps
Interior: two beeps
sound once
is pressed, the
1
43