Switching Between Digital And Analog Modes; Redialing A Number - Motorola i1000plus Owner's Manual

Switching Between Digital
and Analog Modes
To switch from digital to analog mode, or from
analog to digital during a call:
Press f 2.
Depending upon availability, your phone selects the
TDMA digital system or the analog system.
Notes:
• This feature is not available on all models of
this phone.
• Once you switch from digital to analog mode,
you can not switch back to digital mode until
you turn your phone off and on again.
• When you switch from digital to analog mode,
you may still see the digital
the phone is idle (that is, not in an active call).

Redialing a Number

Automatic Redial
Sometimes you may not be able to complete a call
because the cellular system is busy. When this
happens, you will hear a fast busy signal.
With Automatic Redial, your phone tries
continuously to complete the call for the next four
minutes. When it makes a connection, the phone
alerts you with rings that are half as long as those
for a new incoming call. You can begin talking when
the other party answers.
If you hear a fast busy signal:
1. When you see Redial Call?, press S to
redial.
2. If the call does not complete after four
minutes, press S to continue the attempt.
You will see Redial.
indicator while
21