Viewing Your Own Number; Receiving A Call; Switching Between Digital And Analog Modes - Motorola Digital StarTAC Instruction Manual

Viewing Your Own Number

To find out your phone's number:
‰ »
Press .

Receiving a Call

Your phone must be powered on to receive calls.
To answer a call:
æ
Press or open the phone when the
phone rings.Press
when the phone rings.
Note: Opening the phone will not answer the call if
the Open to Answer feature is off. (See "Activating
Open to Answer" on page 86.)
Unanswered Call Indicator
When you cannot take a call, your Digital StarTAC™
keeps a count of your unanswered calls and alerts
you with the message Call XX Unanswered, where
XX is the number of missed calls.
Ç
Press or
you can begin placing calls again.
Ringer Suppress
You can terminate either the ring or the vibrate
indicator by pressing either of the volume keys
during the ring/vibrate cycle. The caller will
continue to hear a ring until voice mail answers.
Switching Between Digital
and Analog Modes
During a call, you can switch from digital to analog
modes, or from analog to digital:
To switch modes, press
Your Digital StarTAC™ will select the TDMA 800 or
TDMA 1.9 band digital system, depending upon
availability, or the AMPS 800 band analog system.
æ
or open the phone
to erase the message, and
ƒ ¤
.
Viewing Your Own Number 29