Pause Dialing - Motorola i1000plus Owner's Manual

36
7. Continue with step 8 below, or return to
step 2 above to store more numbers.
8. Press e to exit the menu.
Storing and Placing Numbers for

Pause Dialing

Entering a Pause in a Number
When you call automated systems, you are typically
prompted by a recorded message to enter PIN
numbers, Voice Mail numbers, etc.
You can store these numbers, along with special
"pause" characters that tell your phone to pause
before sending additional numbers.
1. Follow "Getting to Phone Book" on page 35
to select Store Number. You will see Enter
Number.
2. Enter the phone number you use to access
the automated system.
3. Press f, then press S. You will see
Insert Wait o.
4. Press s to insert a pause (o) into the
sequence.
5. Enter the next group of numbers (such as an
account number or PIN number).
6. Enter any other required symbols (such as *
or #).
7. Insert another pause character, then enter
the next group of numbers by repeating
steps 3 through 5 as often as necessary.
You can store up to 32 digits, including
pauses.
8. Press s to begin storing. You will see
Location __.