Travel Charger; Installing The Travel Charger; Travel Charger Operating Specifications - Motorola i1000 Getting Started

TRAVEL CHARGER

The NTN6197A Travel Charger allows a battery to be charged from
an AC outlet. On one end of the travel charger, an accessory
connector attaches to the bottom of the portable unit. At the other
(AC outlet) end of the device is a compact housing containing the
charging circuitry and a plug-in power supply. A lightweight cable
connects the two ends (accessory connector and supply).
A green LED on the accessory connector indicates that the Travel
Charger is plugged in

Installing the Travel Charger

Figure 1: Installing the Travel Charger
1. While holding the i1000 with its front toward you, insert the
accessory connector with the Motorola logo facing you into slot
on the bottom of the i1000 until you hear an audible click.
2. Plug the Travel Charger's transformer into an AC wall outlet.
The power light (green LED) on the accessory connector will
come on.
Travel Charger Operating Specifications
Input voltage range: 90-264 Vac @ 50/60 Hz.
Operating ambient temperature: 0 C to +50 C
i1000
60
Accessory Connector
Transformer
GETTING STARTED