How To Use - A.O. Smith Puritee User Manual

How to use

1. Turn ON the water connection
through the Ball Valve. (Figure 25)
Figure 25
ON
3. Do not use the purifier if the power
cord is damaged. Call the Customer
care centre. (Figure 27)
Figure 27
DANGER
5. To dispense water push and hold
the faucet lever to dispense the water
from the storage tank. (Figure 29)
Figure 29
Note: Make sure that you discard the first cycle of Pure water, before you start using for consumption.
2. Switch ON the Power supply and press
the Power Button of the purifier. Wait
for few minutes to completely fill water
inside the storage tank. (Figure 26)
Figure 26
4. If there is any strange noise, burning
smell, or smoke, switch off power,
remove the plug immediately and call
the Customer care centre. (Figure 28)
Figure 28
DANGER
6. To dispense water continuously.
Lift up the faucet lever for continuous
water flow.
Pull down the faucet lever for the
continuous water flowing function to
disable/stop. (Figure 30)
Figure 30
15