Charger Installation - AT&T TL77008 User Manual

Getting started

Charger installation

1. Plug the small end
of the smaller power
adapter into the jack
on the underside of the
charger, then route the
cord through the slot
as shown.
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To order a
replacement power adapter, visit our website at
www.telephones.att.com
In Canada dial
2. The power adapter is intended to be correctly oriented in a vertical
or floor mount position.
1 (866) 288-4268
2. Plug the large end
of the smaller power
adapter into a power
outlet not controlled
by a wall switch.
1 (800) 222-3111
, or call
.
4
.