Ending The Programme Through Cancelling; End Of Programme - Blomberg TKF 7431 User Manual

Selecting a Programme and Operating Your Machine
6.19 Ending the programme through
cancelling
A new programme can be selected and started after
"Programme cancel" is activated in order to change the
drying programme.
To cancel any selected programme:
Press "Start/Pause/Cancel" button for about 3 seconds.
"Lint filter cleaning" and "Water tank" warning symbols
light up and "End" label appears on the screen as a
reminder at the end of this period.
A
As the inside of the machine will be
excessively hot when you cancel the
programme while the machine is running,
activate the ventilation programme to
cool it down.
C
If you change the position of programme
selection knob while your machine
is running, then the machine stops,
current programme is cancelled and new
programme information is displayed.
26 /36 EN

6.20 End of programme

"Filter cleaning" and "Water tank" warning symbols
light up and "End" label appears on the screen in the
programme follow-up indicator when the programme
ends. The door can be opened and the machine becomes
ready for a second cycle.
Press "On/Off" button to turn off the dryer.
C
When selected, the 2-hour anti creasing
programme will be activated to prevent
laundry from creasing if you do not take
the laundry out after the programme has
come to an end.
C
Clean the filter after each drying (please
see, Filter cleaning).
C
Drain the water tank after each drying
(please see, Water tank)
Dryer / User Manual