Changing The Programme After The Programme Has Started; Adding/Removing Laundry In Standby Mode; Child-Proof Lock - Blomberg TKF 7431 User Manual

Selecting a Programme and Operating Your Machine
6.16 Changing the programme after
the programme has started
You can use this feature to dry your laundry in a different
programme after your machine has started to run.
For example;
Press and hold the "Start/Pause/Cancel" button for about
3 seconds to "Cancel" the programme in order to select
"Extra Dry" programme instead of "Iron Dry" programme.
Select the "Extra Dry" programme by rotating the
programme knob. Press "Start/Pause/Cancel" button to
start the programme.
C
f you select a new programme by
turning the programme selection knob
while your machine is running, then the
current programme is cancelled and new
programme information is displayed.
6.17 Adding/removing laundry in
standby mode
In order to add or take out laundry after the start-up of the
programme;
1. Press the "Start/Pause/Cancel" button to switch the
machine to "Pause" mode. Drying process will stop.
2. Open the door at Pause position and close it again
after adding or taking out laundry.
3. Press "Start/Pause/Cancel" button to start the
programme.
C
Any laundry added after the drying process
was started may cause the already dried
clothes in the machine intermingle with
wet clothes and the result will be wet
laundry after the drying process is over.
C
Laundry may be added or taken out as
much as desired during a drying process,
but as this process will interrupt drying
continuously, it will extend the programme
duration and increase energy consumption.
Therefore, it is recommended to add
laundry before the drying programme has
started.
C
If you select a new programme by turning
the programme selection knob while
your machine is in standby, then the
current programme is cancelled and new
programme information is displayed.
Dryer / User Manual

6.18 Child-proof lock

There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all button
except the "On/Off" button on the panel are deactivated
when the child-proof lock is active.
In order to activate the child-proof lock, press on
the "audio warning" and "anti-creasing" buttons
simultaneously for 3 seconds.
To start a new programme after the programme is over or
to interrupt the programme, the child-proof lock should be
deactivated. Press the same buttons for 3 sec. again to
deactivate the child-proof lock.
Lock symbol will appear on the screen when the child-
proof lock is activated.
C
Child-proof lock will also be deactivated
when the machine is restarted by pressing
the on/off button.
When the child-proof lock is activated:
• Display icons will not change even if the position
of programme selection knob is changed while the
machine is running or in halt.
• If the child-proof lock is deactivated after changing
the position of the programme selection knob while
your machine is running, your machine stops and
new programme information is displayed
25 / 36 EN