Table of Contents
Advertisement
Selecting a Programme and Operating Your Machine
For example;
Press and hold the "Start/Pause/Cancel" button for about
3 seconds to "Cancel" the programme in order to select
"Extra Dry" programme instead of "Iron Dry" programme.
Select the "Extra Dry" program by rotating the program
knob. Press "Start/Pause/Cancel" button to start the
program.
C
If you select a new programme by turning the
programme selection knob while your machine is
running, then the current program is cancelled and
new programme information is displayed.
Adding/removing laundry in standby mode
In order to add or take out laundry after the start-up of the
programme;
1. Press the "Start/Pause/Cancel" button to switch the
machine to "Pause" mode. Drying process will stop.
2. Open the door at Pause position and close it again
after adding or taking out laundry.
3. Press "Start/Pause/Cancel" button to start the
program.
C
Any laundry added after the drying process was
started may cause the already dried clothes in the
machine intermingle with wet clothes and the result
will be wet laundry after the drying process is over.
C
Laundry may be added or taken out as much
as desired during a drying process, but as this
process will interrupt drying continuously, it will
extend the program duration and increase energy
consumption.
Therefore, it is recommended to add laundry before
the drying programme has started.
C
If you select a new programme by turning the
programme selection knob while your machine is in
standby, then the current program is cancelled and
new programme information is displayed.
6.17 Child-proof lock
There is a child-proof lock to prevent any programme
interruption due to the pressing of button while the
programme is running. The loading door and all button
except the "On/Off" button on the panel are deactivated
when the child-proof lock is active.
In order to activate the child-proof lock, press on
the "audio warning" and "anti-creasing" buttons
simultaneously for 3 seconds.
To start a new programme after the programme is over or
to interrupt the programme, the child-proof lock should be
deactivated. Press the same buttons for 3 sec. again to
deactivate the child-proof lock.
Lock symbol will appear on the screen when the child-
proof lock is activated.
24 /32 EN
C
Child-proof lock will also be deactivated when the
machine is restarted by pressing the on/off button.
When the child-proof lock is activated:
• Display icons will not change even if the position
of programme selection knob is changed while the
machine is running or in halt.
• If the child-proof lock is deactivated after changing
the position of the programme selection knob while
your machine is running, your machine stops and
new programme information is displayed
6.18 Ending the programme through
cancelling
A new programme can be selected and started after
"Program cancel" is activated in order to change the
drying program.
To cancel any selected programme:
Press "Start/Pause/Cancel" button for about 3 seconds.
"Lint filter cleaning" and "Water tank" warning symbols
light up and "End" label appears on the screen as a
reminder at the end of this period.
A
As the inside of the machine will be excessively hot
when you cancel the program while the machine is
running, activate the ventilation program to cool it
down.
C
If you change the position of programme selection
knob while your machine is running, then the
machine stops, current programme is cancelled and
new programme information is displayed.
Dryer / User Manual
Advertisement
Table of Contents
