Changing The Delay Time; Cancelling The Time Delay; Starting The Programme; Progress Of Programme - Blomberg TKF 7431 User Manual

Selecting a Programme and Operating Your Machine
Warning symbol turns on with certain intervals to remind
that the condenser needs cleaning.
Door open
Dryer door open symbol lights up.
Time delay
With the "Time delay" function you can delay the
programme start up to 24 hours.
1. Open the loading door and put the laundry in.
2. Set the drying programme and spin speed, and if
required, select the auxiliary functions.
3. Press "Time delaying" buttons "+" and "-" to set the
desired time delay. The time delay symbol will flash.
4. Press "Start/Pause/Cancel" button. Then the time
delay starts to count down. The Time delay symbol
lights up. Start symbol lights up.
The ":" in the middle of the displayed time delay will start
flashing.
More laundry may be loaded or taken out during the time
delay period. At the end of the time delay countdown
process, time delay symbol fades, drying process starts
and the programme duration is displayed. The time on the
display is the total of normal drying time and delay time.
Time delay is started by pressing the start/pause/cancel
button in the example above.

6.12 Changing the delay time

If you want to change the time during the countdown:
1. Press "Start/Pause/Cancel" button for 3 seconds to
cancel the programme. Time delay function must be
set again for the required time.
2. Press Time delay buttons "+" or "-" to set the desired
time delay.
3. Press "Start/Pause/Cancel" button. The Time delay
symbol lights up. Pause symbol fades. Start symbol
lights up.
24 /36 EN
4. The ":" in the middle of the displayed time delay will
start flashing.

6.13 Cancelling the time delay

If you want to cancel the time delay countdown and start
the programme immediately:
1. Press "Start/Pause/Cancel" button for 3 seconds to
cancel the programme.
2. Then, press "Start/Pause/Cancel" button to start the
desired programme.

6.14 Starting the programme

1. Press "Start/Pause/Cancel" button to start the
programme.
2. "Start/Pause" symbol will light up to indicate that
the programme has started and ":" symbol between
the remaining time will continue flashing.

6.15 Progress of programme

Drying
Wardrobe
Iron
The progress of a running programme is shown through a
number of symbols on the screen.
At the beginning of each programme step, the relevant
symbol in the series of symbols will light up and thus, all
symbols will remain lit up at the end of the programme.
The symbol that is lit up at the far right of the series of
symbols indicates the step that is being carried out.
"Drying":
- Lights up in all programmes apart from drying and
ventilation.
"Iron Dry":
- Starts to illuminate when the drying degree reaches "iron
dry" step and remains illuminated until the next step.
"Cupboard dry":
Starts to illuminate when the drying degree reaches
"wardrobe dry" step, and remains illuminated until the
next step.
"Wardrobe Dry Extra":
Starts to illuminate when the drying degree reach to
"wardrobe dry extra" step.
"Freshen up":
- Illuminates when the programme ends.
C
Anti-creasing icon will light up at the end
of the programme if anti-creasing function
is active.
Anti-
creasing
(Extra)
Refresh
Dryer / User Manual